Best Table Saw Blade for Ripping Hardwood
- Maryam Babar
- Jul 31, 2022
- 6 min read
Updated: Aug 16, 2022
Best Table Saw Blade for Ripping Hardwood
Ever wonder if your table saw is not performing as it is supposed to? There are two major reasons for that, first, keep in check if you are using the right table saw blade. Secondly, be familiar with the material you are cutting and choose the blade accordingly. One of the primary uses of a table saw is ripping hardwood, a table saw is the best tool to perform this. In this article, you’ll get to know about Best Table Saw Blade for Ripping Hardwood and all the tips and tricks to get the best results.
What is the best saw blade for ripping hardwood?
Each table saw blade is designed to perform specifically. In ripping hardwood you have to cut along wood fibers, at job sites or woods. Rip blades are the best to perform ripping hardwood. These are the best blades to get clean edges and fine cutting.
Well, table saws are pretty helpful in numerous heavy tasks but why does your table saw blade burn wood? This can happen only if the blade is dull and rusty, in that scenario the friction between wood and blade can burn the wood.
How many TPI do you need for hardwood?
TPI is the number of teeth in a saw blade. No doubt table saw is the only tool that can produce rip cuts with smooth edges. However, the TPI of the table saw blade matters a lot in order to perform perfect hardwood ripping. Your table saw blade must have TPI between 14 to 36. Are you searching for what type of saw blade is best for ripping hard abrasive timber such as oak? For the ripping of hard and softwood Flat-top teeth blades are the most suitable.
What to look for when buying table saw blades for hardwood?
A table saw can work wonders if you choose the blade wisely. Each task needs specific requirements from the saw blade. You should understand the nature of the work you are performing with your table saw. For hardwood cutting, you need to look for the type of teeth in the table saw. Flat-top teeth are better for Hardwood as they prevent splintering of the wood.
Moreover, the number of teeth matters a lot in ripping hardwood, you should look into TPI if you want to cut hardwood or if you want smooth edges.
Always check if you are getting your table saw blade from a reliable brand. I’ve suggested some top-notch table saw blades to save your time and effort.
List of top 5 Table saw blades for ripping hardwood:
DEWALT has gained the trust of countless saw users indeed. This Table saw blade is an amazing multi-purpose tool. The Tough tungsten carbide material of the blade is compatible with Engineered Wood, MDF, veneer, and plywood but are these blades good for cutting metal? Well, the carbide blade can get damaged as it doesn’t have a diamond coating.
These slim-kerf blades help in the fast and smooth cutting. The additional benefit of a Computer-balanced plate is that it reduces hindrance while cutting. The arbor size of the blade is 5/8”.
For hardwood ripping, it gives a super nice cut with smooth edges. However, the blade does not have a diamond knockout. Also, many saw users have concerns that it works for laminate flooring. No, this blade is typically used for rip cuts, Framing, etc so it’s not ideal for laminate flooring.
Expert opinion:
“What an amazing experience with these blades! The Durable tungsten carbide tooth material is ideal for smooth rip cuts. I must have bought these table saw blades before I would buy them again for sure!” says Carlos.
Key specifications of DEWALT Saw Blades:
The blades come in Metallic color with 60 TPI.
The product has 13.75 x 13.75 x 0.19 inches dimensions.
The table saw blades have an Abrasive Fladder Blade as an included component.
The weight of the blades is 2.95 pounds.
Diabo 10” saw blade is all you’ve been looking for. This saw blade gives you the finest finish in a wide range of materials such as hardwoods, softwoods, plywood, and melamine, and crosscutting. The laser-cut 0.098-inch kerf helps in fast and clean cuts without splintering.
The carbide material has a long life but does the blade rust? Thanks to the Perma-SHIELD Non-stick Coating that protects the blade from corrosion, heat, and gumming. This 10-inch saw blade has 60 carbide teeth with a 5/8-inch arbor.
Although the price is slightly higher the specifications justify it all. Does this blade have a flat grid? No, This blade is an ATB or Alternate Top Bevel blade. It does not have a flat grind.
Expert opinion:
“Extremely fine and smooth cuts I got with this table saw blade. The blade is super sharp and of high quality. Well, it IS a Freud so what do you expect? Great! Says daniel.
Key specifications of Diabo by Freud Saw Blade:
The weight of the product is 1.7 pounds.
It has dimensions of 13.7 x 11.7 x 0.3 inches.
The grinding type of the blade is a High Alternate Top Bevel (ATB).
The hook angle is 15 degrees while the diameter is 10”.
Wen has come up with this 10-Inch diameter 40-Tooth Carbide-Tipped Professional Woodworking Saw Blade. The blade has a rating of up to 6000 RPM and a 5/8-inch arbor.
The machine-cut carbide-tipped teeth help in cutting smooth edges. Heat expansion slots help the blade to expand and provide maximum accuracy while ripping hardwood. Is the WEN table saw blade durable? Yes, the blade has a long life. The unique protective coating prevents heat, rust, corrosion, gumming, resin, and more.
The blade has an Ultra-thin 1/10-inch kerf (2.4 mm) which helps in efficient cutting. Does this blade come with a diamond arbor knockout? Well, no, It does NOT have a diamond knockout.
Expert opinion:
“The blade fits perfectly, no bends or damage is done to it. It cut through any hardwood I put in front of it with ease. Love it.” says Carly.
Key specifications of WEN Woodworking Saw Blade:
The blade’s weight is 1.48 pounds.
The product dimensions are 13.5 x 11.26 x 0.67 inches.
The blade is equipped with 40 carbide-tipped teeth which perform hardwood ripping efficiently.
This carbide material blade has 10-Inch 50-Tooth Alternate Tooth Bevel. This IRWIN table saw blade is designed for General Purpose cutting and hardwood ripping. Can you use an IRWIN blade in carpentry? The blade comes with a racer tooth for a smooth finish which is ideal for woodworking tasks like carpentry. The arbor of this blade is about 5/8".
The blade has sharp oversized carbide teeth that are re-sharp enabled for longer life. Does this blade produce a flat cut? No. The Tooth Alternate Tooth Bevel tends to make a knife-like edge on either side for a cleaner cut. Thanks to its Heat Resistant Non-stick coating the blades are quite durable. The blade has a thin kerf of about 3/32 to produce sharp and clean cuts.
Expert opinion:
“This is definitely my new favorite blade. The is sharp and durable, providing perfect rip cuts and crosscuts. I will definitely be buying this table saw blade again.” Says Rebecca.
Key specifications of IRWIN Marples Table Saw Blade:
The blade is 10” in diameter, while the number of teeth are 50.
The dimensions of the product are 12.9 x 11.65 x 0.43 inches.
The blade weighs 1.76 Pounds.
The kerf is .098"/2.5mm while the hook angle is 15°.
This Amana tool carbide blade is all that you need in your saw blade collection. The Prestige general-purpose which goes perfect with solid wood, plywood, MDF and chipboard. The 10” blade and 40 carbide tooth with a steep 20° bevel angle cut perfect and precise cuts. The tooth grind is ATB. Does this blade cause vibration? Well, .102" thick tool-steel plate with copper plugs practically eliminates vibration.
The precision-ground carbide teeth have minimal run-out as these are individually computer-verified. The kerf of the blade is about .134 (3.4mm) while the arbor is about ⅝”. How would this work on epoxy in a river table? Well. this will not perform well on epoxy.
Expert opinion:
“I must say this table saw blade has impressed me. Cutting softwood was like butter. I haven't cut a ton of hardwood yet but every cut seems to use less power and goes smoothly.
Key specifications of Electro-Blu 10 Inch Blade:
The blade has 5.75 x 2 x 0.75 inches dimensions.
The weight of the blade is about 1.02 Grams.
The Hook Angle of this blade is 18°.
The tool-steel place has .102 (2.6mm) thickness.
Comments